*Viking Pure Solutions should only be used on surfaces that have been identified to be at risk for disease transmission or where required by regulation.

According to the CDC, approximately 1 out of every 20 hospitalized patients will contract a Hospital Acquired Infection (HAI).

In response, there needs to be a standard terminal cleaning of hospital rooms and common areas as a process to prevent the spread of infection. This would be defined as the physical cleaning of hard surfaces followed by disinfection with a hospital grade disinfectant. Unfortunately, the consistent monitoring of this traditional process is extremely challenging as there are inevitable variations to the process as different staff complete the tasks.

Because it is not unusual for bacteria and virus to be left in place, plus labeled dwell times for traditional chemicals are often not fully met, it is crucial to adopt the use of Viking Pure Solutions for the complete cleaning and sanitizing of your healthcare facility.

Viking PureSolutions are 80 times more effective than BLEACH and have been specifically evaluated for its efficacy in the healthcare industry. Documented data supporting its use can be downloaded directly from the Viking Pure Solutions webpage.

The method for terminal cleaning with the electrolyzed solutions in the attached clinical evaluation, from "Infection Control Today" was a 2 step process.

First is the use of Sodium Hydroxide (PureClean) to physically clean all hard surfaces. Second, each room and common area physically cleaned was followed with an electrostatic application of Hypochlorous Acid (PureSan). This sequential application of electrolyzed solutions resulted in a statistically significant reduction in surface bacteria vs. traditional cleaning methods and "demonstrates that they are extremely effective in significantly reducing environmental bioburden found to be essential for infection prevention and patient quality assurance."

Plus, all electrolyzed solutions are generated on site alleviating concerns for ultimate availability, while drastically reducing facility costs.

All solutions are also 100% non-toxic, have no salt detected in final product, require no dilution and have been proven to kill all surface bacteria under 30 seconds, when used according to directions.

Antibacterial and Antiviral efficacy reports are also available for download from the "Healthcare" section of the Viking Pure Solutions website.

Contact Viking Pure Solutions today to learn more about how you can implement our services.